6 Benefits of Copper Wiring

Copper wiring has been around for many years and is still commonly used today. With copper wiring, you are the presented with a number of different benefits. If you plan on doing any wiring in the near future, the copper wire should most likely be in your plans. Here are a few of the many benefits that you can get by using copper wiring in your wiring project.

  1. Best Conductor

Out of all of the different metals and wire out there, copper is a best conductor out of all of them. You can get more power in a piece of copper than with any other option you have. This makes it efficient and helps you get job done the better than you could otherwise.

  1. Flexibility

When you are using an electrical wire, there is a good chance that you will need it to be flexible. When you wire something in a house, you will most likely have to bend the wire around several different things. You might have to go into a very precarious angle to get job done. This makes copper wire very desirable as it is very flexible. Even though it has some flexibility, you are not going to the lose any toughness, either. It is not brittle when you bend it, so it will not crack or break.

  1. High Melting Point

It really takes a lot to melt a copper wire. Therefore, if you are worried about the safety, copper wire is going to be one of your best options. If an overload or surge comes through the wire, it is not likely to melt or burn. This means that your odds of a fire starting as a result of the power problem are going to be greatly decreased.

  1. Does Not Loosen

When you use the copper wiring in a home, you are less likely to have to go back and fix it in the future. When materials other than copper are used to the wire things, they can sometimes loosen where they are connected and come unattached. This can lead to some seriously dangerous conditions and waste a lot of time fixing everything.

  1. Avoid Incompatibility Problems

Most appliance and the electrical equipment manufacturers specify that copper wire is in all of their products. When you do not have copper wiring in the walls of your home, this can cause an incompatibility problem in the future. If you try and run a non-copper wire up to a copper wire, it could cause a galvanic action and the start some serious problems. This could effectively destroy the copper wire that it is attached to. This could cause you some serious work in the repairing the entire system. Getting copper from the beginning will make everything a lot easier in the long run.

  1. Easy to Work With

Most electricians prefer to the work with copper wiring because it is very easy to work with. You can strip it easily, pull it through the tight spots, and not have to worry about surface oxides forming on it. It truly is the best choice for wiring a building.