Identifying Home Electrical Wire Colors

The quickest way to identify house electrical wiring is by its colour. Depending on where a wire ultimately gets installed, you cannot always rely on the markings printed on the insulation coating, nor will you always be able to read them legibly.
The helpful reality is that you really have only three types of wire to identify: hot, neutral, and ground.
A number of different colours may be used for the hot wire in various types of switch wiring, while neutral and ground wires should always be the same. If you are engaging in any home wiring, proper identification of wires is imperative so that you end up making the right connections.
Before you begin a wiring project, make sure you understand the basics of wiring and the colour arrangement of the circuit. With the power turned off, there is no danger of electrocution, but you could still make a wrong connection somewhere and end up with an incomplete circuit.

DISCLAIMER: Before you being work on the wiring of an outlet, light fixture, fan, or any appliance, always turn the individual circuit off at the main panel. This will cut power to that particular circuit and prevent electric shock.

Why Wires are Different Colors

Home electrical wires are different colours so that one can be distinguished from one another. Inside their colourful insulation coating, they all consist of a copper conductor. The colours simply make it easier for you to keep track of your work. They could conceivably all be the same colour, but then you would have to mark each wire individually to tell them apart. The different colour coatings do that for you.

Standard Colors Used for Home Wiring

What follows here is the standard colouring for wires throughout a home. The gauge or size of the wire may change depending on the current flowing through the circuit, but the colour is a consistent feature.


The wire that carries the current from the power source to the outlet or receptacle is the hot wire. Whenever you see a black wire, you know it is hot. There are other wires that carry current in more complicated circuits, but black is always hot.

Think about most wires and cables that you don’t see as part of your home’s wiring. Your television, your laptop cord. All of these are hot, as they actively carry the power that keeps your devices running, and they are almost exclusively black.


To complete the circuit, the current must return to the power source. It does this through the neutral wire, which is always white.

In some instances, a white wire may be marked with a piece of black electrical tape at its ends. A white wire that has been marked with black means it’s acting as a hot wire and is no longer neutral.

Green or Bare

When you see either a green wire or a bare copper wire, you can be sure it is a ground wire. A ground wire is used as a protective measure. Ground wires return fault current to earth ground, protecting the individual from electrocution.


Red wires are commonly found in sheathed, multi-conductor cable. These are typically used for switch wiring. Since red wires still conduct current, they are considered hot.

Yellow and Blue

Yellow and blue wires are sometimes used in more complicated circuits. If they are, they are used as hot wires to conduct current between switches and poles. For this reason, they are also known as travellers.

Other Colors

These are the most common colours used. Other colour combinations, including striped wiring, may be used for other applications. Not all colours are standardized.